84099794 kerb mirror – Description

84099794 kerb mirror is a compact auxiliary observation mirror designed for compatible with VOLVO truck mirror systems to improve close-range visibility near the vehicle corner and curb-side zone during low-speed maneuvers. The mirror is typically used to support safer yard operation, docking, tight-turn positioning, and urban delivery routes where blind-spot control is critical.

OE references supported in this listing: 84099794 and 20716739. Select by OE reference and confirm the mounting interface, bracket style, and curvature requirement on the vehicle before ordering.

Packing weight reference: 1.34 KG. Quantity in box: 1. Quantity per pallet: 27. Built for commercial vehicle use, the assembly is intended to maintain stable seating under vibration, road spray exposure, and routine fleet wash cycles. For best results, check that the mirror head orientation and adjustment range match the intended left/right installation position on the mirror carrier.

Typical issues that indicate replacement include cracked mirror surface, hazing, reduced clarity at night, loosened mounting points, or vibration blur at speed. A correctly fitted 84099794 kerb mirror helps restore near-field visibility and supports predictable maneuvering in confined spaces.

Bulk Purchase Benefits

Quantity in box: 1

Quantity per pallet: 27

Packing weight reference: 1.34 KG

• OE-reference identification supports faster receiving and picking for workshop supply.
• Cross-reference coverage in one listing: 84099794 / 20716739.
• Single-piece box packing helps reduce handling damage for mirror components.
• Suitable for fleet stocking programs and scheduled visibility-maintenance cycles.
• Pallet planning support for multi-site service distribution.

DIY Replacement Guide

Symptom-based replacement cues

• Cracked mirror surface, hazing, or reduced clarity in rain/night operation
• Loose fitment, rattling noise, or visible shake at idle
• Broken mounting points or damaged carrier interface after impact
• Incorrect viewing angle caused by worn adjustment mechanism

Basic replacement steps

1. Park safely and secure the vehicle. Ensure the mirror area is clean and dry.
2. Inspect the carrier/bracket and identify fasteners or clips used by the current mirror.
3. Remove the damaged mirror carefully to avoid stressing the carrier or housing.
4. Clean the mounting surface and check that the carrier is not bent or cracked.
5. Install the replacement mirror and confirm full seating and stable alignment.
6. Adjust the viewing angle and perform a short road test to confirm no vibration blur.

OE reference check: 84099794 / 20716739.

Compliance Statement

This product is supplied for aftermarket replacement use and is intended to match OE reference and mounting configuration for correct installation when properly selected.

Always confirm OE reference, mounting interface, and required mirror curvature before ordering to avoid mismatches.

OE-reference fitment control

Compatible with VOLVO FH12, FM12, FH16, FM9, NH, FMX.