20455995 mirror – Description

20455995 mirror is a mirror replacement component selected by OE reference for trucks compatible with VOLVO, intended for service restoration when the existing mirror component shows damage, looseness, or poor seating. OE references covered: 20455995 and 20567685. Packing weight: 0.28 kg. Quantity in box: 1. Fitment should be confirmed by OE reference and mounting configuration before ordering.

In day-to-day fleet operation, mirror-related damage can reduce visibility, increase vibration at speed, and lead to repeated workshop callbacks if seating points are worn. A correct selection should match the removed unit by outline, mounting points, and contact faces, then sit flush without forced tabs. When the mounting configuration is confirmed, the replacement supports stable positioning under vibration typical of long-haul and mixed urban routes.

The 20455995 mirror is listed for EU truck applications including FH12 (1993), FH16 (1993), NH (1999), FM12 (1998), and FM9 (2001). For ordering control, keep the primary OE on bin labels and store the secondary OE as a cross reference to reduce picking errors. Confirm side and mounting layout on the vehicle before installation to avoid mismatches across different mirror system variants.

For workshop efficiency, record the OE reference on the job card after fitting and verify a quick functional check (stable positioning, no rattles, and consistent seating). Keeping 20455995 mirror stocked as a fast-moving service item can reduce downtime after minor impacts and support planned maintenance schedules across mixed fleets.

Bulk Purchase Benefits

Packaging control: 1 pc/box supports accurate receiving, shelf counting, and workshop kitting.

OE-based stocking: label bins by OE reference 20455995 and keep 20567685 as a cross reference to reduce mis-issues.

Maintenance readiness: a small, serviceable mirror component helps shorten downtime after minor impacts.

DIY Replacement Guide

■ Symptom-Based Replacement

■ Damage, looseness, vibration at speed, or visible gaps around the mirror component interface

■ Increased wind noise or rattling from the mirror area during rough-road operation

■ Seating instability after previous repairs due to worn contact faces or misalignment

Service steps

1) Confirm OE references and compare the removed unit to the new part by outline and mounting configuration.

2) Clean seating faces and inspect mounting points for distortion or debris before installation.

3) Install evenly and verify flush seating; re-check stability after a short road test.

Compliance Statement

This part is intended for commercial vehicle maintenance use and should be selected by OE reference with physical confirmation of the mounting configuration on the installed mirror system.

Fitment should be confirmed by OE reference and mounting configuration before ordering.

OE & Mounting Verification

Compatible with FH12 (1993), FH16 (1993), NH (1999), FM12 (1998), FM9 (2001).